Looting pit or collapsed qanat shaft: telling the two apart in VHR imagery

An excavated archaeological site with stone-walled pits, low chamber walls, and standing pillars cut into dry earth.

Anyone who reviews VHR frames over a tell in Iraq, a necropolis in Syria, or a settlement mound in Afghanistan has hit this problem: a circular depression shows up, and you can't immediately say whether it's a looter's pit or a shaft on an old qanat line that finally gave way. Both read as dark, round intrusions on bare earth. Both can sit a meter or two across. In a region where karez and qanat networks run for kilometers under exactly the kind of terrain that also holds burials and occupation layers, the two features overlap constantly, and a wrong call either way wastes a report or misses a real incident.

Why the confusion happens

Qanat and karez shafts were dug on a line, spaced at fairly regular intervals, to access a sloping underground channel. When one collapses, naturally or from agricultural traffic above it, it leaves a round sinkhole with a cone of slumped soil around the rim. Looting pits are also round, also leave a soil cone, and on a site with multiple burials they can cluster in numbers that, from directly overhead at sub-meter resolution, start to resemble a line of access shafts, especially if the looters are working their way down a row of graves rather than targeting one tomb. Add a season of wind-blown dust softening edges on both, and shape alone stops being a reliable test.

What actually separates them on the ground

Spacing and alignment do most of the work. Qanat shafts sit on a straight or gently curving line that follows the slope of the water table, usually with consistent intervals you can measure shaft to shaft. A string of looting pits rarely holds that discipline; they cluster around whatever the looters believe is a burial or structure, so spacing is uneven and the line, if there is one, tracks a wall foundation or a row of graves rather than a hydraulic gradient.

Spoil tells you more than the hole. A qanat shaft that collapsed slowly shows a shallow, symmetric slump with spoil settled and often vegetated if the collapse is old. A looting pit dug in the current season throws spoil unevenly to one side, the side the diggers were facing, and the material looks loose and lighter-toned than the surrounding surface because it hasn't weathered yet. Rim shape follows the same logic: qanat collapses tend toward a clean, near-circular rim from gravity acting evenly; dug pits are more often irregular, oval, or squared off where someone worked with a hand tool or small excavator bucket.

Context on the frame matters as much as the feature itself. A shaft that lines up with known or mapped qanat routes, follows a valley gradient, and shows no associated foot or vehicle traffic is doing what qanats do. A pit near a tomb, a mound summit, or a cemetery boundary, with a fresh track leading to it, is doing something else entirely.

Why the date matters more than the shape

What the hole looks like matters less than whether it's new. A qanat shaft that has sat open for forty years and a looting pit dug last month can both throw a dark circular shadow on a single frame. The difference only shows up when you put two dated frames side by side and see that the depression, the spoil heap, or the vehicle track leading to it wasn't there last quarter. That's the comparison a monitoring officer doing this by hand has to run site by site, archive frame against archive frame, every review cycle, which is slow and easy to get wrong when a site has dozens of candidate features. Looting Monitoring runs that same comparison against your watch list and returns a dated before/after pair with the new disturbance flagged, so the question stops being "is this a pit or a shaft" in isolation and becomes "did this appear this quarter."

If you're tracking a site where this distinction keeps coming up every review cycle, it's worth seeing how a quarter-over-quarter comparison handles it for you.

Get startedBack to the blog